Polyacrylamide (PAM) is known for its excellent flocculation treatment of sewage and good thickening and water retention effect, but now the market is mixed, there are many inferior products, customers regret because they do not know the quality of the product and find problems after purchase, if some customers find that there is a peculiar smell when using polyacrylamide (PAM), what is the reason for the peculiar smell of polyacrylamide (PAM)? Is such a product qualified? Will it affect the use

Sludge dewatering is an important part of sewage treatment, and polyacrylamide (PAM) as a sludge dewatering agent cannot be replaced by other dehydrating agents. However, many customers find that when using polyacrylamide (PAM) sludge for dewatering, the sludge sticks to the filter cloth or clogs it. There are also situations where the water quality is unclear and the viscosity of the water increases. Through a large number of practice and test tests, Henan Laixing Water Purification will answer

Polyacrylamide (PAM) is a polymer that is soluble in water and insoluble in most organic solvents. It is very popular in the water treatment industry as a flocculant and has been widely praised in other industries for its excellent performance. However, before using it correctly, its correct dissolution method should be followed to achieve the desired effect. If the dissolution method is wrong, it will not only waste chemicals, increase costs, but also reduce efficiency. Based on years of practi

Now the hot summer is getting closer and closer. There are not many things to pay attention to when polyacrylamide (PAM) is used normally. However, there are many things to be aware of in a hot environment. In order to avoid unnecessary trouble, Henan Laixing Water Purification will share with you the precautions and specific details of using polyacrylamide (PAM) in summer.

The leather industry is one of the important industries in China, and tanneries produce a large number of products while also producing up to 7×107t/a of wastewater. Chromium tanning liquid in tannery wastewater is very toxic, with a chromium concentration of 3000mg/L~6000mg/L, and contains a large amount of SS and COD, usually only 30% of leather wastewater can meet the discharge standard, seriously polluting the environment. Polyacrylamide (PAM) plays a very important role in leather wastewate

Polyacrylamide (PAM) is a linear organic polymer and a flocculant used in water treatment. It can neutralize the opposite charge particles in the sewage, adsorb and bridge the suspended particles in the sewage, make the suspended particles form large flocculents, and accelerate the sedimentation speed of the suspended solids. Due to its good flocculation effect, it has been widely used in sewage treatment. In addition to its application in water treatment, PAM is also widely used in other indust

For users of polyacrylamide (PAM), it is understandable that one of the criteria for measuring the quality of polyacrylamide (PAM) is the number of mesh of polyacrylamide (PAM), but how is the so-called mesh number defined? Does polyacrylamide (PAM) mesh count affect quality? Does the mesh number of polyacrylamide (PAM) determine the quality?

Polyacrylamide (PAM) needs to be dissolved in water in a certain proportion when used, so the shelf life of polyacrylamide (PAM) aqueous solution is much lower than that of polyacrylamide (PAM) solid. If not used in time, the viscosity will decrease when used again. There are many customers who have failed to degrade due to improper use and excessive use of aqueous solutions. So what is the reason for the decrease in viscosity of polyacrylamide (PAM), and does the decrease in viscosity affect th

Polyacrylamide (PAM) is known as the best product because of its own characteristics in many industries, which is closely related to our lives. For example, anionic polyacrylamide (HPAM) is widely used in dish soaps, cleaning agents, and laundry detergents in daily life. So what role does anionic polyacrylamide (HPAM) play in cleaning agents?